Products & Services

Pre-engineered steel building introduction

 

Pre-engineered steel building - The first choice for Investors

Pre-engineered steel buildings are the ideal solution that we offer for your project. With competitive cost, fast construction and guaranteed quality, pre-engineered steel buildings are widely used in civil and industrial construction such as: factories, warehouses, cold storages, hangar, showroom, commercial center, supermarket, parking garage, station, airport….

See more about  Application of pre-engineered steel buildings

 

What is pre-engineered steel building? 

Pre-engineered steel building (or prefabricated steel building) - PEB is the building made up of steel built-up sections. These components are designed according to international technical standards, manufactured at a factory and erected on construction sites. Each PEB is a customized steel building that is tailor-made to the investor's architectural and business requirements. Therefore, pre-engineered steel buildings achieve outstanding advantages compared to conventional buildings.

A completed pre-engineered steel building project will have four main stages: consulting, design, manufacturing and erection.  Each stage has quality control and quality management to ensure the project meets the timeline and quality requirements.

Winfield Chemical factory project

 

Model of a standard pre-engineered steel building


 

Structural components of Pre-engineered steel building

Pre-engineered steel buildings use a combination of 3 main components which are connected by bolts:

  • Primary framing component: Main framing basically includes the rigid steel frame of the building (columns and rafters). The building's major load is being borned by these members. They are usually made of built-up beams with a cross-section "I" or "H".

  • Secondary components: Purlins, Girts and Eave struts are secondary structural members used as support to walls and roof panels. Purlins and girts shall be cold-formed “Z” sections or “C” sections with stiffened flanges. 

  • Sheeting or Cladding for roof and wall. The sheeting materials are usually cold-rolled steel, high tensile 550 MPA yield stress, with hot dip metallic coating of galvalume sheet or anti-rust painting.

Erecting the primary frame system

Besides the main components, the pre-engineered steel building also has a number of accessories to complete the project:

  • Insulations

  • Canopy, roof skylight, door and window

  • Trim and flashing system, gutters, ridge ventilators..

  • Overhead crane system...

 

The basic parameters of a pre-engineered steel building

  • Building Width: is defined as the distance from outside of eave strut of one sidewall to

  • outside of eave strut of the opposite sidewall

  • End Bay Length: This is the distance from outside of the endwall columns’ outer flange to the centerline of the first interior frame columns.

  • Building height:Building height is the eave height which usually is the distance from the bottom of the main frame column base plate to the top outer point of the eave strut

  • Interior Bay Length: This is the distance between the center lines of two adjacent interior main frame columns. The most common bay lengths are 6m, 7.5m and 9m. Any bay length up to 15m is possible

  • Roof Slope (x/10): This is the tangent of the roof with respect to the horizontal. The most common roof slopes are 0.5/10 and 1/10. Any practical roof slope is possible

  • Dead Load: The self weight of the pre-engineered building structure including all its components such as frames, floors, secondary members, sheeting, bolts, etc.

  • Live load: Any variable load that results from intended use of the structure during its lifetime.


 

Advantages of pre-engineered steel buildings

 

Optimal cost, Competitive price

The price per square meter can be 20-30 % lower when compared to the conventional building construction. To reach this impressive number, each stage of the pre-engineered steel building is optimized by:

  • Designed with modern technical standards to help optimize the amount of materials used and use renewable or recycled source materials.

  • Factory manufacturing under strict quality control system helps to minimize errors and defective products

  • Simple and fast erection at the site helps shorten construction time and save erection costs

 

High quality, Long lifetime 

Pre-engineered steel building components are designed and manufactured at the factory before being installed on site. Input materials are selected from reputable suppliers with clear origins. Besides, the steel components will go through the quality control process before delivering to the site. Modern and professional pre-engineered steel building factories (like Vis Steel Structure) apply international standards in our operation and manufacturing processes such as:

  • ISO quality management system

  • OHSAS Occupational Health and Safety Management System standard.

 

Tailor-made building solution to the investor's architectural and business requirements

Another advantage of pre-engineered steel buildings is that they are customized steel buildings to adapt the specific needs for every company. Depending on the industry, production line, geographic location, and investment capital of the investor, each project will be consulted and designed accordingly. PEB companies with a team of specialized and experienced engineers will provide the optimal solution for customers.

 

Easy expansion, efficient recycling

Manufacturing factories often have plans to expand in the future. Therefore, pre-engineered steel buildings are the perfect choice because they are flexible to expand their area at a very low cost. Not only that, the space in pre-engineered steel buildings is also easy to change depending on the needs of users. At the end of the project's lifespan, companies can get a portion of their investment capital back by recycling steel.


 

Eco friendly buildings

As a 70% popular industrial building worldwide, pre-engineered steel buildings are increasingly being used for its environmental friendliness. Combined with the application of green building standards, pre-engineered steel buildings help reduce CO2 emissions, save energy, and efficiently recycle.


 

Contact with Vis Steel Structure

Vis is a young and enthusiastic steel structure company in Vietnam. We desire to become one of the leading steel structure companies in Vietnam and around the world. If you are looking for a trusted steel structure contractor, with reasonable cost, and guaranteed quality, please contact us promptly.

Please email to info@vissteel.com.vn for project consulting. We will contact you at the earliest.

 

VIS Steel Structure Co. Limited,

Address: N11, No. 119, Pho Quang Street, Ward 9, Phu Nhuạn District, HCMC
Email: info@vissteel.com.vn
Phone: (+84) 28 354 710 29
Website: https:/vissteel.com.vn

OUR PARTNERS

CT
Hempel
Blaklader
MCDC
BacViet
BIDV
Ton Dong A
Ton Hoa Sen